|
| Electrical Engineering Technology | |||
| Associate in Applied Science | |||
| Electrical Engineering Technology emphasizes both the theory and the application of scientific and engineering methods, and prepares the student for immediate employment or for transfer to an upper division school upon graduation. The graduate is prepared to be the intermediary between the design engineer and the skilled craftsman. EETs translate problems into solutions by building equipment using their knowledge of mathematics, physics, linear and digital electronics, microprocessor hardware and software, machines, robotics, process control, circuit analysis, and computer programming. This program may require more than two years to complete if an entering student has not completed admission requirements for the program (contact admissions for further info). Students lacking any of these courses may be required to take MAT096 Elementary Algebra and Trig. to prepare for MAT130 Applied Algebra and Trig. and PHY090 Preparatory Physics. The program is accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology (TAC/ABET). SEQUENCE OF COURSES: This model is a two-year course schedule for students meeting all program requirements and deciding to pursue full-time study. Schedules will be redesigned for those requiring preparatory courses or those deciding to pursue part-time study. |
|||
| Click
Here to View the Online Catalog Note: College applicants are expected to review all of the rules, regulations and prerequisites detailed in the college catalog. |
|||
| |
|||
| COURSES | |||
| FIRST YEAR | HOURS/WEEK | CREDITS/SEMESTER | |
| Fall Semester | Class | Lab | Total |
| TEC 100 Introduction to Technology | 1 | 0 | 1/2 |
| EET 111 Electrical Construction Laboratory | 1 | 3 | 2 |
| EET 121 DC & AC Circuits & Laboratory | 4 | 3 | 4 |
| CST 106 Computer Applications | 2 | 2 | 3 |
| ENG 110 Written Expression | 3 | 0 | 3 |
| MAT 130 Applied Algebra & Trigonometry | 4 | 0 | 4 |
| SOS 111 Public Policy | 3 | 0 | 3 |
| 18 | 8 | 19.5 | |
| Spring Semester | Class | Lab | Total |
| EET 112 Electronic Fabrication Laboratory | 0 | 3 | 1 |
| CST 123 Visual Basic for Technology | 2 | 2 | 3 |
| CIV 113 Drawing with CAD | 1 | 2 | 2 |
| EET 150W Electronic Devices & Laboratory | 3 | 3 | 3 |
| MAT 160 Applied Calculus | 4 | 0 | 4 |
| 10 | 10 | 13 | |
| SECOND YEAR | HOURS/WEEK | CREDITS/SEMESTER | |
| Fall Semester | Class | Lab | Total |
| EET 247L Energy Conversion Lab | 0 | 3 | 1 |
| EET 247W Energy Conversion & Automation and Laboratory | 3 | 0 | 3 |
| EET 251 Electronic Circuitry & Lab | 3 | 1 | 4 |
| EET 260 Digital Electronics & lab | 2 | 2 | 3 |
| ENG 150 Technical Writing | 3 | 0 | 3 |
| PHY 161 Physics I & Lab | 3 | 3 | 4 |
| 14 | 9 | 18 | |
| Spring Semester | Class | Lab | Total |
| EET 267 Microprocessors & Lab | 3 | 2 | 4 |
| EET 201 Senior Seminar | 1 | 0 | 0 |
| EET 230 Electronic Design Project | 0 | 3 | 1 |
| EET 252 Electronic Communications Systems & Lab | 3 | 3 | 4 |
| EET 270 Control Systems and Robotics & Lab | 3 | 3 | 4 |
| PHY 162 Physics II & Lab | 3 | 3 | 4 |
| Social Science Elective | 3 | 0 | 3 |
| 15 | 14 | 20 | |
| TOTAL CREDITS: 70.5 | |||
| NOTES: | |||
| 1Students should consult with the department chairperson or designee to determine the appropriate mathematics course. For completion of the Electrical Engineering Technology program within two years, entering students are required to have completed: Sequential High School Math I,II,III, or Applied Math I, II, III, IV, or their equivalent Regents Physics or Principles of Technology I, II, or General Physics Additional high school mathematics and technical courses are also recommended. However, students lacking this background may enter the program and take preparatory courses. |
|||
| After BCC… then what? | |||
| Graduates of the BCC EET program are employed in a variety
of large and small industries, both in the local area and nationally. Some
are working on computers for the space shuttle, as well as aircraft control
systems. Others work in the electrical power industry, on the distribution
and monitoring of electrical energy. Many build and install advanced computer
systems for industrial customers around the world. Others are successful
technical representatives of large companies, advising clients on the uses
of new technologies in products under development.
Graduates are prepared for immediate employment as engineering assistants, technical specialists, or field service representatives. They work for companies like NYSEG, IBM, Xerox, Eastman Kodak, Universal Instruments, Raymond, DEC, and Corning Glass. The EET graduate can transfer directly into a Bachelor of Technology program, or with additional physics, chemistry, and calculus courses at BCC, into a four-year engineering program. |
|||
| Contact Information | |||
| Electrical Engineering Technology Department William H Murray 607 778-5017
__________________________ |
|||
| Click here for web pages maintained by Electrical Engineering Technology Dept. |
|||